Corning Cable FREEDM Loose Tube Gel-Free Single-Mode Plenum Cable

FREEDM Loose Tube Gel-Free Plenum Cable are flame-retardant, indoor/outdoor, plenum-rated cables suitable for installation in inter- and intrabuilding backbones in aerial, duct and riser or plenum applications.

Plenum Cable Features:

• Loose Tube design offers mechanical ruggedness and environmental durability while the all-dielectric cable construction requires no grounding or bonding
• Water-swellable yarn eliminates the need for gel-filling compound and allows more efficient and craft-friendly cable preparation
• The flexible, flame retardant outer jacket is UV resistant and enables direct exposure to sunlight
• Cable has Interlocking Armor for special applications requiring additional mechanical durability
• The plenum rating of this cable eliminates the need to transition splice when entering the building and minimizes routing restrictions once inside the building
• Color-coded 250 µm Fibers (12 Fibers per Tube)
• Single-Mode Fiber Code, ITU 652.D Compliant
• Wavelength: 1310/1383/1550 nm
• Maximum Attenuation: 0.4/0.4/0.3 dB/km
• Plenum Outer Jacket
• Cable Marking Lengths are in Feet
• Nominal Cable Weight: 86 lb/1000 ft
• Nominal Outside Diameter: 0.44"
• Maximum Tensile Load, Short-Term: 600 lbf
• Maximum Tensile Load, Long-Term: 180 lbf
• Minimum Bend Radius, Loaded: 6.6"
• Minimum Bend Radius, Installed: 4.4"
• Meeting the requirements of the National Electric Code (NEC) Article 770 - The cables are also OFNP and FT-6 listed and Meet Burn Test Criteria
• Design and Test Criteria: ANSI/ICEA S-104-696; NFPA 262 (for Plenum, Riser and General Building Applications)
• Available Fiber Counts: 24, 36, 48, and 60

Minimum Order Quantity is 2624 Feet. Larger amounts of Cable may be ordered. Please contact our Sales Department if needed.